TIM Adams and Pip Watt live in a sustainably built, energy efficient house that is warm in winter, cool in summer and has no bills all year round.
Tim designed their 7-star energy rated home on about 7 hectares (about 17 acres) at Gherang near Geelong in the south eastern part of Australia in the state of Victoria. The home is fitted with different energy systems plus various heating and cooling techniques to make the building carbon neutral and comfortable.
Tim is the current president of the Victorian Building Designers Association who also runs a sustainable home design business, F2 Design, to produce high performance energy efficient houses. Tim is also an accredited thermal performance assessor for the organisation.
He became interested in energy efficiency and sustainable building design after the 1975 world oil shock.
Tim and Pip have designed a home that has its own strength, domestic water and waste water treatment systems.
The house has 3 bedrooms, 2 bathrooms and north facing open plan living areas with glazed walls to allow maximum natural light on the floor slab to capitalise on obtainable solar heat.
There are no eaves on Tim and Pip’s home.
Tim said the use of eaves needed careful consideration as thorough fixed eaves can hinder passive thermal effects if not used intelligently.
The day I visited outside it was around 13 Celsius (about 55 farenheit) while inside the house it was a steady 19.5 C (67 F) and the only footwear needed was socks.
Once Tim and Pip chose to install a solar strength grid satisfy system they carefully calculated their annual electricity use and came up with an average daily consumption figure of 9.25 kilowatt hours.
They reasoned that a three kilowatt photovoltaic solar strength grid satisfy system would capture enough sunlight to cope with their usage and produce an excess to sell back into the grid.
The house has a photovoltaic solar strength electricity system that consists of a three kilowatt inverter with 18 solar panels of 180 watts each.
Tim said when they installed their solar strength system there was a state government 66 cents per kilowatt hour satisfy-in tariff for different strength systems so he arranged a 15 year contract on this rate with his strength supply company.
“The first three-month electricity bill with the smart meter in place delivered a $205 credit, already though the average daily sunshine last summer (2010) was 1.5 hours below average,” Tim said.
The Adams have a normal range of household appliances that includes a kettle, toaster, microwave, espresso coffee maker, oven, an induction cooktop, complete size dishwasher, fridge, front load washing machine and assorted entertainment equipment.
The roof’s wide V-shape design is an important part of the home’s solar strength system.
The most northerly facing of the two sections of the roof is angled to position the solar panels for maximum exposure to the sun’s daily passage.
The thought behind the roof design is worth further examination as being inverted method people are protected from serious injury as any fall method a slip into the roof’s long box gutter, not on to the ground 4 metres below.
Tim designed the roof’s single box gutter so it was wide and thorough enough to efficiently gather the rainwater needed for domestic use.
Cleaning it is also easier than a traditional gutter as it is wide (Tim calls it his lap pool) and can be easily swept and debris quickly removed.
Tim and Pip have plenty of roof space from three buildings that act as the catchment for their 120,000 litre (26,374 gallon) capacity rainwater tanks.
Warm water for a floor slab heating system comes from 60 solar evacuated tubes mounted on the roof plus back-up from an Italian combustion boiler with a high efficiency heat exchanger.
To allow the internal temperature to be controlled the house faces north and there is no under slab insulation.
Laying the concrete floor slab directly on to earth allows the choice of a cooler slab on hotter days.
To encourage further cooling in warm seasons the house incorporates cross ventilation design principles and employs other devices, such as temperature controlled switches on windows, ceiling fans and an evaporative water characterize designed to channel cool air inside.
The home is a 7-star energy rated building due to only the southern side being fitted with double glazed windows.
There is insulation in the walls and ceiling with standard R3.5 rated insulation batts used (R rating in this case method about 160mm (6 inch thick) batts.
The house is essentially a square-shape building with rendered brick main sustain walls and picture windows otherwise clad with plantation native timber weatherboards.
The yellow stringybark weatherboards that clad the house were produced with inventive radial cut processing and sustainable growing methods to reduce environmental impacts and waste.
Tim explained that the most expensive outlay they had to build their home was for a worm-based black-water treatment sewage system.
This cost $10,000 Aus. to install and has an annual $300 service fee but they calculated this expense would be offset against the savings they make by owning their own strength and water systems.
Tim said he had long wanted to build a sustainable design home to prove his design principles but also to show how cost effective it was to build such a house.
“I wanted to be able to build a new house and truly put my money where my mouth is,” Tim said.
“I did this (design) to use as an example.
“You can do this sort of thing (build a sustainable house) without spending a lot of money.”